Product introduction
Vertical Stainless Steel Bucket Hoist Grain Soybeans/Bucket
Elevator Equipment
The TD bucket elevator produced by our company is suitable for
conveying powdery, granular small pieces of non-abrasive or
semi-abrasive bulk materials, such as moving part (hopper and
traction belt), upper section with drive roller, lower section with
tension roller, an intermediate casing, a driving device, a
backstop brake, etc. ,it is suitable for conveying powdery,
granular small pieces of non-grinding or semi-grinding loose
materials upwards, such as coal, sand, coke, cement, water ore,
etc.The characteristic of this machine is the rapid centrifugal
discharge: it uses a belt as a traction member, so it is not
suitable for conveying large blocks of material with high grinding
and resistance.
The conveying capacity of TD bucket elevator is 3.1~66m3/h, and the
height is 4~30m. In order to meet various requirements, this
machine has a variety of manufacturing methods and installation
methods.
.
Product parameter
| Model | Size of material(mm) | Speed of Bucket (m/s) | Bucket Capacity (L) | Capacity (m3/h) |
| TD-630 | 50-195 | 0.5 | 2.5-501.8 | 15-800 |
| TD-500 | 50-195 | 2.5-501.8 | 15-800 |
| TD-400 | 50-195 | 2.5-501.8 | 15-800 |
| TD-315 | 50-195 | 2.5-501.8 | 15-800 |
| TD-250 | 50-195 | 2.5-501.8 | 15-800 |
| TD-160 | 50-195 | 2.5-501.8 | 15-800 |
| More model can be customized |
Main Features
1. Small driving power. The use of inflow feeding, induced
unloading, large capacity hopper intensive layout, almost no
material return and digging phenomenon when the material lifting,
so less ineffective power.
2. Wide range of promotion. This kind of elevator on the type of
materials, characteristics of less requirements, not only can
improve the general powder, small granular materials, but also can
improve the grinding of large material, good sealing, less
environmental pollution.
3, Smooth operation. The design principle and processing method of
the machine, the operation of the machine, trouble-free time more
than 20,000 hours. The lifting degree is high, the elevator runs
smoothly, so it can reach a higher lifting height.
4, Long service life. Elevator feed to take the inflow type, no
need to use bucket digging material, rarely extrusion and collision
phenomenon between materials. In the design of the material in
feeding, unloading less scattered, reduce mechanical wear.
Application
This series bucket elevator is suitable for conveying powder,
granulated and small lump of cut grinding and grinding cut small
materials, such as coal, cement, stone, sand, clay and ore, etc.,
as a result of the elevator traction institutions is a circular
chain, thus allowing conveying high temperature materials (material
temperature not over 250 ℃). General conveyor height can reach 40
meters high.If you want to know more about the application of this product,
please contact us.
