Product introduction
Bucket lift single bucket elevator with big hopper Grain elevator
for sale
The TD bucket elevator produced by our company is suitable for
conveying powdery, granular small pieces of non-abrasive or
semi-abrasive bulk materials, it is composed of a running part (hopper and belt), an upper section
with a transmission drum, a lower section with a tensioning drum,
an intermediate casing, a driving device, a backstop brake device,
etc., suitable for upward transport of loose density ρ<1.5t/m3
powder, granular and small pieces of non-abrasive and semi-abrasive
bulk materials, such as coal, sand, coke, cement, crushed ore, etc.
The lifting height is up to 40 meters.
TD type bucket elevator structure: transmission device TD type
bucket elevator transmission device has two forms with YZ type
reducer ZQ (or YY) type reducer. The YZ-type speed reducer is
directly mounted on the spindle head, eliminating the need for a
transmission platform, a coupling, etc., which makes the structure
compact and light, and it has a special-shaped roller backstop
inside, which is reliable. The reducer has low noise, stable
operation, and floats with the main shaft to eliminate installation
stress.
.
Product parameter
| Model | Size of material(mm) | Speed of Bucket (m/s) | Bucket Capacity (L) | Capacity (m3/h) |
| TD-630 | 50-195 | 0.5 | 2.5-501.8 | 15-800 |
| TD-500 | 50-195 | 2.5-501.8 | 15-800 |
| TD-400 | 50-195 | 2.5-501.8 | 15-800 |
| TD-315 | 50-195 | 2.5-501.8 | 15-800 |
| TD-250 | 50-195 | 2.5-501.8 | 15-800 |
| TD-160 | 50-195 | 2.5-501.8 | 15-800 |
| More model can be customized |
Main Features
The driving power is small, and the intensive arrangement of inflow
feeding, induced discharge and large capacity hopper is adopted.
There is almost no return and digging when the material is lifted,
so there is little invalid power.
1. The lifting range is wide. This type of elevator has less
requirements on the types and characteristics of materials. It can
not only promote general powdery and small granular materials, but
also promote materials with greater grinding properties. Good
sealing and less environmental pollution.
2. The operation reliability is good. The advanced design
principles and processing methods ensure the reliability of the
whole machine. The trouble-free time exceeds 20,000 hours. The
lifting height is high. The hoist runs smoothly, so it can reach a
higher lifting height.
3. The service life is long, the feed of the hoist adopts the
inflow type, no need to use the bucket to dig the material, and the
phenomenon of extrusion and collision between the materials rarely
occurs. The machine is designed to ensure that the material is not
scattered during feeding and unloading, reducing mechanical wear.
4. The structure is simple, the operation is stable, the digging
loading, the rapid centrifugal discharging.
Application
Bucket Elevator is widely used in various industries of powder and
small particle material lifting.If you want to know more about the
application of this product, please contact us.
