Product introduction
Bucket Elevator Corn Grain Lifting Equipment Food Grain Bucket
Elevator
Bucket elevator is a widely used conveying equipment, can
effectively lift the material from the low to the high.Bucket
elevator consists of the shell, traction parts (conveyor chain),
hopper, driving wheel (head wheel), steering wheel (tail wheel),
tensioning device, guide device, feeding port and discharge port. Bucket elevator is the use of a series of hopper uniformly fixed on
the unended traction member, vertical lifting material continuous
conveyor machinery, bucket elevator using a series of hopper fixed
on the traction chain or tape in the vertical or close to the
vertical direction of upward transport of bulk material,divided
into ring chain, plate chain and belt three types.
The hopper scoops the material from the storage below, with the
conveyor belt or chain lifted to the top, around the jacking wheel
after turning down, the bucket elevator will dump the material into
the receiving slot. Belt drive bucket elevator transmission belt
generally uses rubber belt, installed in the lower or upper
transmission drum and the upper and lower reversing drum. Chain
drive bucket elevator is generally equipped with two parallel
transmission chain, on or below a pair of drive sprocket, below or
above is a pair of sprocket. Bucket elevator is generally equipped
with a housing to prevent dust in the bucket elevator.
Product parameter
| Model | TD-160 |
| Size of material(mm) | 50-195 |
| Speed of bucket(m/s) | 0.5 |
| Bucket capacity(L) | 2.5-501.8 |
| Capacity(m3/h) | 15-800 |
| Applied material | Used in cement, stone, sand, coal, grain and ore conveying |
Product features
1. Good sealing and less environmental pollution.
2. Convenient operation and maintenance, less wearing parts.
3. Low power consumption, due to energy saving and less
maintenance, very low power consumption.
4. Reliable operation design principle, reliable operation of the
whole machine, good sealing. Less environmental pollution.
5. High precision. The casing by folding and middle pressure
reinforcement, and then by welding, good rigidity, beautiful
appearance.
6. The mechanical size is small, compared with other kinds of
elevators with the same amount of lifting, the mechanical size of
this elevator is small.
7. Large conveying capacity, this series of lifting machine has
TD160~TD630 kinds of specifications. The lifting capacity ranges
from 15 to 800m3/h.
8. Convenient operation, less maintenance, less wearing parts. The
conveying chain is a sleeve roller chain, which is used for
inducing gravity discharge and vertical lifting of various powdered
and lumped particles.
Application
Bucket Elevator is widely used in various industries of powder and
small particle material lifting, suitable for food, medicine,
chemical industrial products, screws, nuts and other products of
lifting feeding. If you want to know more about the application of this product,
please contact us,our professional engineers will answer your
questions.
